Software Performance (CPT Demos) 36th Edition

From wiki.gis.com
Jump to: navigation, search
Capacity Planning Tool TABLE OF CONTENTS 36th Edition
1. System Design Process (CPT Demos) 36th Edition 2. GIS Software Technology (CPT Demos) 36th Edition 3. Software Performance (CPT Demos) 36th Edition
4. Server Software Performance (CPT Demos) 36th Edition 5. GIS Data Administration (CPT Demos) 36th Edition 6. Network Communications (CPT Demos 36th Edition)
7. GIS Product Architecture (CPT Demos) 36th Edition 8. Platform Performance (CPT Demos 36th Edition) 10. Performance Management (CPT Demos) 36th Edition
12. City of Rome Year 1 (CPT Demos) 36th Edition 12. City of Rome Year 2 (CPT Demos 36th Edition) CPT What’s New 36th Edition


Figure A-3.1 The CPT Calculator can be used to generate custom workflow service times for use in your system design.

This section shares lessons learned about selecting and building effective GIS design solutions that satisfy operational performance and scalability needs. Software technology allows us to model our work processes, and provide these models to computers to optimize user workflow performance. The complexity of these models, the functions selected to generate our display, the complexity of the data source, and how application functions are orchestrated to analyze and present information processing needs all have a significant impact on computer system workload and subsequent performance and scalability.

Workflow description is retained in a workflow recipe. Performance factors used to generate the workflow recipe include the following:

  • Software
  • Map Document (Imagery)
  • Density
  • %DataCache
  • Complexity
  • Resolution
  • Output

Proper workflow selection establishes the foundation for a successful system architecture design.

Software technology selection

Figure A-3.2 CPT Calculator software selection establishes the workflow baseline. The drop-down list shows the software technology profile selections available in the CTP Calculator.
The GIS software technology patterns were introduced in Chapter 2. The CPT Calculator can generate workflow processing loads from a variety of software technology patterns. Figure A-3.2 shows the CPT Calculator Software dropdown list located in cell E3 providing a list of the available software technology selections. Your Software technology selection identifies the baseline used for generating the selected workflow processing loads.
  • Selection picks from a list of the most common user workflows.
  • Selection identifies the software technology pattern.
  • Software nickname is included in the workflow recipe.

Map Document/Imagery selection

The CPT Calculator cell title will change based on the software technology selection. The Map document (MapDoc) dropdown selection is provided for GIS workflows, and the Imagery data management (Imagery) dropdown selection is provided for the ArcGIS for Server Imagery workflows.

ArcGIS map document (MapDoc) selection

Figure A-3.3 CPT Calculator MapDoc selection. This is a dropdown list that identifies which rendering engine will be used by the map service.
Figure A-3.3 shows the CPT Calculator MapDoc selection in cell G3. The selection options are MXD or MSD. The selection choice is included in the Workflow recipe.
  • Selection applies to ArcGIS for Desktop and standard web mapping workflows.
  • MXD must be selected for Desktop workflows, and MSD is the preferred choice for web mapping.
  • MSD must be selected for all map publishing workflows since ArcGIS 10.1.
  • MSD selection reduces SOC service time by 50 percent.


ArcGIS imagery selection

Figure A-3.4 CPT Calculator imagery selection. The imagery selection identifies which type of dataset is used for managing access to imagery data.
Figure A-3.4 shows the CPT Calculator Imagery selection in cell G3. The selection options are MosaicDS or RasterDS. The selection choice is included in the Workflow recipe.
  • Selection applies to ArcGIS for Server image services.
  • Mosaic dataset is the preferred selection.
  • Mosaic dataset selection reduces imagery pre-processing times.

Mosaic dataset host is selected in cell A11 (FGDB or DBMS). When selecting an Imagery workflow, cell J6 will provide a list of available Imagery data formats.

ArcGIS density/portal selection

Figure A-3.5 CPT Calculator Density selection. The density/portal selection modifies workflow traffic and rendering time processing loads. Portal configurations modify registered services to include Web portal processing loads
Figure A-3.5 shows the CPT Calculator Density/Portal selection in cell H3. The selection choice is included in the Workflow recipe (V for Vector Only and R for Raster Image, include Portal when services are registered with a Portal Web server).
  • Selection applies to all workflows.
  • Raster image should be selected when imagery layer is included in the display.
  • JPEG is the default output format for raster image selection.
  • PNG24 is the default output format for raster image selection.
  • Portal selections should be used for services registered with a Portal server.

Portal for ArcGIS registered workflows

Portal for ArcGIS provides a collaborative content management systems that organizations can deploy in their own infrastructure (on premises or in a private cloud). Portal establishes a common reference location for self-service ArcGIS services management and collaboration throughout the organization.

Portal selections (VPortal and RPortal) identify workflow density for hosted ArcGIS for Server workflows registered with Portal, and these workflows include increased service time on the Web service component for Portal content management processing along with the GIS Server processing loads.

A majority of Portal operations include creating Web Maps and/or adding services to the site, actions which establish registered services with the Portal for ArcGIS site. Portal Web Maps that include services from external Internet sources should use the Portal workflow (no internal hosted service loads). Internal registered services should use portal in the density/portal selection for creating the portal loads.

ArcGIS percent data cache (%DataCache) selection

Figure A-3.6 CPT Calculator MapCache selection. The map cache setting identifies how many layers will be pre-processed into a tiled map cache.
Figure A-3.6 shows the CPT Calculator %DataCache selection in cell I3. The percent dynamic is calculated (1-%DataCache) and the %Dyn percentage is included in the Workflow recipe.
  • %DataCache selection is included to highlight the advantage of cached map services.
  • Selection identifies the percent of dynamic map layers that will be pre-processed and included in a map cache when publishing the service.
  • MapCache service can be included with the workflow using the +mapcache selection.
  • Workflow recipe identifies the percent of dynamic layers remaining in the display.


Display complexity selection

Figure A-3.7 Display complexity is used to establish workflow performance targets; selection identifies the display processing load relative to a medium complexity baseline workflow.
Figure A-3.7 shows the CPT Calculator workflow complexity selection in cell E6. Map complexity setting is identified in the workflow recipe. Workflow service time adjustments are applied to the application and database service times.

Workflow complexity directly impacts display performance and system cost. CPT Calculator was used to generate results for an AGS103 REST MSD V 100%Dyn Med 13x7 PNG24 mapping service supporting 100,000 TPH with Xeon E5-2637v2 4 core (1 chip) 3500 MHz servers:

  • Medium complexity requires two 4-core servers with local response time of 0.34 sec.
  • Light complexity requires one 4-core server with a local response time of 0.20 sec.
  • Heavy complexity requires two 4-core servers with a local response time of 0.48 sec.
  • 3x Medium complexity requires five 4-core servers with a local response time of 1.02 sec.


Resolution selection

Figure A-3.8 Calculator resolution selection identifies the map output display size. More traffic is required when publishing larger map resolution.
Figure A-3.8 shows the CPT Calculator resolution selection in cell F6. Selection is included in the workflow recipe in hundreds of pixels. Select a resolution that best matches the average map size of your published service. The map resolution rendered by the published map service is often determined by the size of the client map display.
  • DeskDefault 1920x1080 map size selection.
  • WebDefault 1366x768 map size selection.
  • 256x256 map cache selection.
  • 400x300 small mobile phone selection.
>Comparison of high-definition smartphone displays
  • 600x400 optimum performance web map size (half HTML page display).
  • 1366x768 tablet, rich Internet application large device format.
  • 1920x1080 Workstation, high resolution ArcMap client.
  • 2560x1600 Very high resolution client.

Custom resolution settings can be entered in cells J3:K3.

  • Display traffic is adjusted proportional to the number of pixels in the display.
  • Service time is adjusted by 25 percent of the display pixel variation.


Output selection

Figure A-3.9 Several output service formats are available for map publishing. Select the format that applies to your published service. Calculator will use the output look-up table to adjust traffic and loads based on your selection.
Figure A-3.9 shows the CPT Calculator output selection in cell G6. Output selection makes a difference in both traffic and processing loads. Select an output that matches your published service.
  • Default JPEG for outputs with raster imagery layer
    • JPEG is opaque—suitable for base layer only
  • Default PNG24 for vector-only map layers
  • PNG supports transparency overlays, good for business layers
  • PNG8 compresses best
  • PNG32 best color spectrum
  • PDF good for local printing
  • Feature used for simple editing of business layers
    • Minimize feature layers in mash-up to keep traffic loads reasonable.
    • Use image layers for basemap and non-edited business layers.
  • Feature also used for desktop workflows, high-traffic loads
  • ICA used for Citrix WTS terminal client traffic


Vector storage format selection

Figure A-3.9 Several vector data source formats are available for your selection. Calculator will use a look-up table to adjust output traffic and loads based on your data format selection.
Figure A-3.10 shows the CPT Calculator data source selection in cell J6. GIS workflow application service time and traffic adjustments are made as shown in the data source adjustment table based on the data source selection.

Selection provides a dropdown list of standard GIS vector data sources.

  • SDE DBMS (SDE geodatabase) is the primary baseline workflow selection.
    • Versioned SDE geodatabase used for maintenance workflows.
    • Simple feature SDE geodatabase for replicated read-only publication database.
  • File geodatabase is good for single-server publication data source.
  • Shapefile performance overhead scales with size of data—not recommended for multi-user environments.


Imagery storage format selection

Figure A-3.11 Several imagery data source formats are available for your selection. Calculator will use a look-up table to adjust output traffic and loads based on your data format selection.
Figure A-3.11 shows the CPT Calculator imagery data source selections in cell J6. GIS workflow application service time and traffic adjustments are made as shown in the data source adjustment table based on the data source selection.
  • Imagery data format selection depends on a variety of business factors.
    • SDE raster dataset is no longer recommended as the optimum storage format.
    • Mosaic dataset provides optimum data management and performance.
  • CPT provides preliminary performance expectations for imagery data format selection.
Note: Additional information on imagery management strategies is provided in Lesson 4: GIS data administration.


Standard workflow selections

Figure A-3.12 CPT Calculator standard workflow selection with peak loads of 100,000 TPH will require two Xeon E5-2637v2 4 core (1 chip) 3500 MHz GIS server platforms.
Standard Workflows included on the CPT Workflow tab were introduced in Chapter 2. Figure A-3.12 shows how you can select project workflows or standard workflows at the bottom of the Calculator input display.
  • Select Workflow tab in cell D30.
  • Select desired workflow from cell E30.

ArcGIS 10.3 for Server Standard workflow selections

  • AGS103 REST Light dynamic: Good for simple business layer map services.
  • AGS103 REST Medium dynamic: Good for most web mapping services deployment.
  • AGS103 REST Medium 40 percent dynamic $$: Good for web mapping services with cached basemap.
  • AGS103 REST Medium 20 percent dynamic $$: Candidate for simple web editing with focused business layers and cached basemap.
  • AGS Full MapCache Service: Great for high-performance cached web map or imagery services.
Best Practice: Optimum complexity settings generate reasonable system design performance targets.
Warning: Workflow complexity established too high during design will generate inflated hardware and licensing cost estimates.
Workflow complexity established too low during design can increase deployment risk.

Medium complexity workflows will satisfy most standard web mapping deployment needs.

Custom workflow processing loads

Figure A-3.13 Custom workflow performance loads are generated from baseline workflows. Calculations begin with the selected baseline service times at the bottom row and work to the adjusted workflow service times at the top. Selected software performance factors are applied to generate custom baseline service times.
Figure A-3.13 shows the calculations made by the CPT Calculator in generating adjusted custom workflow loads. CPT Calculator workflows are generated from performance benchmark baselines.

Starting point

  • Software pattern selection: Establishes baseline processing load and display traffic.

First adjustment

  • Map document selection: Adjusts map processing loads (SOC).

Additional selection impact on workflow loads

  • Display complexity: Adjust map processing loads (SOC, SDE, DBMS).
  • Percent data cache: Adjust map processing loads (SOC, SDE, DBMS).
  • Display resolution: Adjust traffic and map processing loads (SOC, SDE, DBMS).
  • Data density: Adjust traffic and processing loads (WTS, SOC, SDE, DBMS).
  • Output format: Adjust traffic and processing loads (web, SOC).


Figure A-3.14 Custom workflow service times created on the Calculator tab are copied to CPT Workflow tab. Workflow service times can then be copied and included in Project Workflows
Figure A-3.14 shows where the CPT Calculator workflow service times show up on the Workflow tab. Calculator workflows provide a source for both standard and custom workflow performance targets.

Calculator workflows are copied to the CPT Workflow tab to include in project workflows.

  • Standard Workflows are pre-generated from the CPT Calculator and provided on the Workflow tab.
  • You can use the Excel Copy/paste values function to include custom workflows in Project Workflow list.
Best Practice: Software technology baseline service time, traffic loads, and relative performance adjustments are derived from test benchmarks.


CPT Capacity Planning videos

  • Chapter 3 video shows how to create custom workflows on the CPT Calculator tab and then move these workflows to your Project Workflow section on the Workflow tab for use in your design.

The next section will take a closer look at ArcGIS Server software performance.

Capacity Planning Tool TABLE OF CONTENTS 36th Edition
1. System Design Process (CPT Demos) 36th Edition 2. GIS Software Technology (CPT Demos) 36th Edition 3. Software Performance (CPT Demos) 36th Edition
4. Server Software Performance (CPT Demos) 36th Edition 5. GIS Data Administration (CPT Demos) 36th Edition 6. Network Communications (CPT Demos 36th Edition)
7. GIS Product Architecture (CPT Demos) 36th Edition 8. Platform Performance (CPT Demos 36th Edition) 10. Performance Management (CPT Demos) 36th Edition
12. City of Rome Year 1 (CPT Demos) 36th Edition 12. City of Rome Year 2 (CPT Demos 36th Edition) CPT What’s New 36th Edition

Page Footer
Specific license terms for this content
System Design Strategies 26th edition - An Esri ® Technical Reference Document • 2009 (final PDF release)